:: PETEX e-Learning:  Well Completion

Shopping Cart

PETEX e-Learning:  Well Completion

After a well is drilled, there is still much that needs to be done before oil and gas can begin to flow to the surface.

In this module you will learn:
  • Basic steps of well completion
  • Considerations in well completion design
  • Common types of equipment and mechanisms used including:
    • Tubular goods
    • Packers sleeves
    • Production liners
    • Wellhead and trees
    • Subsurface safety valves
  • Common types of lower well completions:
    • Open hole
    • Cased and perforated
    • Open hole with liner
  • Perforating options
  • Considerations for lower completions at the sandface
  • Special completions:
    • Horizontal wells with multistage hydraulic fracturing
    • Wells with extended reach drilling
    • Intelligent completions
    • Multiple completions

The Well Completion module consists of the following:

  • Lesson 1- Well Completion Overview
  • Lesson 2- Well Completion Components
  • Lesson 3- Lower Completions
  • Lesson 4- Special Completions
  • Well Completion Glossary
  • Quiz

Well Completion Image
It should take you approximately 60 to 75 minutes to complete this module.


Recommended viewing resolution: 1280x1024


Buy the Well Completion e-learning module:
For multiple licenses or for use of ‘Well Completion’ for use in training, please contact us at 800.687.4132 or 512.471.5940 or by sending an email to petex@www.utexas.edu

Web
Catalog No. 93.M0110 - $115.00 for 6 months