The University of Texas at Austin
As part of the Web Central Services Retirement project, the ITS website will be retired. Information about IT services will be replaced by two new sites, IT@UT and UT ServiceNow, and ITS departmental information will be migrated to a new location. All changes will be completed by 7/28/2016.

Public Internet Access

Connecting to utexas Wi-Fi: Mac OS X

To connect your Macintosh computer running OS X 10.7 or later to the utexas wireless network, you may use either the automated or manual method provided below.


First, remove the connection for before connecting to utexas.

Automated Method

  1. Click the Wi-Fi icon at the top of the screen, then select Open Network Preferences. If your computer’s wireless feature is off, then select Turn Wi-Fi On.
  2. Select utexas-wifi-help from the Network Name menu and wait until you are connected.
  3. Open a Web browser.
  4. You should be redirected to a UT login page. Log in using your UT EID and password.
  5. Select Click here to set up utexas now.
  6. Under Mac OS, click automated installer.
  7. Click the green Start > button.
  8. A window will pop up. Click Allow.
  9. The XpressConnect window will open. Enter your UT EID and password, then click Continue.
  10. Enter your computer account information in the window that pops up, then click OK.
  11. If the installer is successful, a green check mark will appear and you can click Done. Your computer should now be connected to the network. If you run into problems during the installation, please try the manual installation method.

Manual Method

  1. Click the Wi-Fi icon at the top of the screen, select Turn Wi-Fi On and then utexas.

  2. In the authentication pop-up box, enter the following information:

    • Username: Your UT EID
    • Password: Your UT EID password
    • Check Remember this network.
  3. If a window labeled Verify Certificate opens, click Show Certificate. Make sure that the certificate is issued from GeoTrust DV SSL CA - G4.

    • If the certificate is NOT issued from GeoTrust DV SSL CA - G4, then you are connecting to an untrusted network. Click Cancel, and try connecting in a different area.
    • If the certificate IS issued from GeoTrust DV SSL CA - G4, then check Always trust "utexas," and click Continue.
  4. Click Join.

You are now connected to the utexas network.

Note: In some cases, your computer may not be able to reconnect to utexas after it has been restarted, put in Sleep mode, or connected to another network. To resolve this, select the Wi-Fi icon in the desktop menu bar and toggle Wi-Fi off and then on.

Last updated April 24, 2015 @ 11:40 am

We Can Help

Get help from an expert:

* UT Service Desk

* Call us at 512-475-9400

* Submit a help request online

We also have a walk-in service in the first floor lobby of the Flawn Academic Center (FAC). Stop by and let us help you!