Web Historical Disclaimer:
This is a historical page
and is no longer maintained at this location. Read our
Web history statement for more information and visit the link(s) below to access the current version of the site.
The current OnCampus site can be reached at http://www.utexas.edu/oncampus
A Publication of THE UNIVERSITY OF TEXAS AT AUSTIN
Austin entrepreneur teams with university professors to found startup technology company; UT to receive royalties from sale of its products
By Rae Nadler-Olenick
A dynamic Austin scientist/entrepreneur has brought together two professors at The University of Texas at Austin to found a startup company to produce semiconductor and opto-electronic devices faster and cheaper than ever.
Molecular Imprints Inc. will rely on leading technology developed by professors Grant Willson and S.V. Sreenivasan and their students, said technology entrepreneur Dr. Norman Schumaker. Schumaker is chief executive officer of FOReTEL Associates Ltd., the Austin-based consulting firm that is guiding the enterprise in its early days and has provided initial seed money.
Renee Mallett, associate director of the Office of Technology Licensing at the university, said in addition to owning equity in the company, the university also will receive royalties from the sale of its products.
Willson holds the Rashid Engineering Regents Chair in the Department of Chemical Engineering and also is a professor of chemistry and biochemistry. Sreenivasan is an associate professor in the Mechanical Engineering Department. The pair's long-term collaboration has yielded a mechanically driven process to emboss the tiny silicon chips used in computers and other household products a process that could replace current methods.
At present, chips are produced by a technique of pattern replication known as optical lithography. A pure silicon substrate, or wafer, is first coated with a thin metal film. Next comes a layer of photo-resist, a chemical that is both light-sensitive and acid-resistant. The wafer is then exposed to a pattern of projected light and in a step somewhat analogous to what occurs in photography "developed" to leave a reverse pattern of exposed metal, which can be etched with acid. Finally, the photo-resist itself is dissolved away. The resultant three-dimensional grid defines the structure of the semiconductor device.
This conventional optical lithography has limitations. To make the ever-smaller, faster chips the industry demands, it is necessary to employ ever-decreasing wavelengths of light.
"Now, theyre approaching wavelengths high-powered enough to damage the materials theyre working with," said Sreenivasan.
It also is extremely expensive. A state-of-the-art projection printer the instrument used to project the light design costs about $20 million. Moreover, the sophisticated laser-based multi-lens equipment generates large operational and maintenance expenses.
Willsons and Sreenivasans new process produces comparably high-quality semiconductor devices using a molding procedure that operates at low pressures and room temperature. Their process, called "step and flash," requires neither a laser light source nor a complicated lens assembly. It starts with creation of a wafer-sized glass or quartz template that has the desired relief structure engraved on it. An organic liquid called ultraviolet-curable monomer is introduced to fill the gap between the template and a second surface (the mold). The template is then exposed to ultraviolet light, which shines through it, solidifying the liquid beneath into a high-fidelity replica.
Precise alignment is critical to molding the super-small, super-fast circuits, according to Sreenivasan, whose expertise is in precision machinery. "These are very fine structures, and you have to lay them one on top of the other using extreme accuracy," he said. His research team built the first step and flash machines from stripped-down equipment donated by IBM.
Semiconductor Research Corp. provided early support for the Willson groups research.
The researchers said economics alone will give their process an immediate competitive edge. Step and flash already has the ability to process chips as fast as optical lithography, but much cheaper, they said. Beyond that lies the potential to create still smaller devices at even higher speeds.
Schumaker, a pioneer in LED, laser and TurboDisc technology, managed the New Materials and Technology Group at AT&T Bell Laboratories in New Jersey between 1968 and 1984. In 1984, he left to found EMCORE Corp., today a leading manufacturer of process systems for a wide range of semiconductor products. He stayed with EMCORE as chairman, chief executive officer and president until the companys initial public offering was finalized in 1996.
He "retired" to Austin the following year, and immediately began looking for new startups to sponsor. The citys reputation as a technology mecca, with facilities like The University of Texas at Austin, SEMATECH and a variety of semiconductor operations, played a role in his choice.
Schumaker describes FOReTEL as a consulting, mentoring operation. He works with only one carefully selected client at a time, usually becoming chairman and chief executive officer temporarily, until the new company is up and running. For Molecular Imprints Inc., that could mean three years or more.
"It takes at least three to five years to get things rolling," he said. He expects to hire 20 or 30 people as technology staff most of them engineers within the next couple of years. The company also will acquire its own research and development facility.
He called Molecular Imprints Inc. a particularly interesting and exciting opportunity.
"Im one of the few people in the United States who will talk to equipment entrepreneurs," he said. "Equipment is not a very popular investment opportunity, since most investors are looking for more rapid returns. But, Ive focused my career almost exclusively on semiconductors and the equipment necessary to succeed in a competitive industry.
"Process equipment is the enabling technology for the whole sector. Without the necessary tools, the industry cannot prosper."