| Online Publications | |||||
|---|---|---|---|---|---|
| Name | Primary Author | Date | File |
||
"The testing of sliding electrical contacts for homopolar generators" |
Brennan, M. | March 1979 |  |
||
"High current and high current density pulse tests of brushes and colelctors for homopolar energy stores" |
Marshall, R. A | March 1981 | |
||
"AARADCOM/DARPA compact homopolar generator" |
Gully, J.H. | January 1982 | |
||
"The proposed CEM-UT 50 MJ pulsed homopolar generator power supply" |
Weldon, W.F. | January 1982 | |
"The TAERF scientific railgun theoretical performance" |
Marshall, R.A. | January 1982 | |
"A coaxial radial opening switch for a distributed-energy-storeo rail launcher" |
Upshaw, J.L. | March 1984 | |
"A compulsator driven, rapid-fire EM gun" |
Pratap, S.B. | March 1984 | |
"A new high current laboratory and pulsed homopolar generator power supply at The University of Texas at Austin" |
Floyd, J.E. | March 1984 | |
||
"Compact homopolar generator development at CEM-UT" |
Gully, J.H. | March 1984 | |
||
"Distributed current feed and distributed-energy-storafe railguns" |
Holland, L.D. | March 1984 | |
||
"Fabrication of a compact storage inductor for railguns" |
Spann, M.L. | March 1984 | |
||
"Instrumental for EM launcher systems" |
Nalty, K.E. | March 1984 | |
||
"Pulsed power requirements for EM launchers" |
Weldon,W.F. | March 1984 | |
||
"Physical scale modelin to verify energy storage inductor parameters" |
Zowarka, R.C. | March 1984 | |
||
"Switching overview-fundamental issues" |
Woodson, H.H. | March 1984 | |
||
"Systems tester for compact homopolar generator component development" |
Walls, W.A. | March 1984 | |
||
"The DES railgun facility at CEM-UT" |
Holland, L.D. | March 19894 | |
||
"Pulsed power packs a punch" |
Weldon, W.F | March 1985 | |
||
"A compulsator-driven rapid fire railgun" |
Pratap, S.B. | Novermber 1986 | |
||
"A rapid fire, compulsator-driven railgun system" |
Spann, M.L. | November 1986 | |
||
"Design and construction of a two-stage opening switch" |
Rech, B.M. | November 1986 | |
||
"Design of a homopolar generator for 400 m/s slip ring velocity brush testing" |
Price, J.H. | November 1986 | |
||
"Electromagnetic induction launchers" |
Driga, M.D. | November 1986 | |
||
"Fabrication of compensated pulsed alternator for a rapid fire railgun system" |
Werst, M.D. | November 1986 | |
||
"Final manufacture and assembly of a modular 60 megajoule pulsed homopolar power supply" |
Novle, W.L. | November 1986 | |
||
"Future trends for compulsators driving raulguns" |
Pratap, S.B. | November 1986 | |
||
"Focusing experiments in plasma coaxial railguns" |
Driga, M.D. | November 1986 | |
||
"HPG operating experience at CEM-UT" |
Gully, J.H. | November 1986 | |
||
"Improved energy density homopolar generator" |
Walls, W.A. | November 1986 | |
||
"Observation and analysis of current carrying plasmas in a railgun" |
Cook, R.W. | November 1986 | |
||
"Railgun current density distributions" |
Long, G.C. | November 1986 | |
||
"Recoil in electromagnetic railguns" |
Weldon, W.F. | November 1986 | |
||
"Self excitation of iron core homopolar generators" |
Perkins, D.E. | November 1986 | |
||
"Simulation and predicted performance of the Balcones GEDI expermient" |
Wu, A.Y. | November 1986 | |
||
"Small caliber mobile EML" |
Wehrlen, D.J. | November 1986 | |
||
"System design of the ultrahigh velocity GEDI experiment" |
Laughlin, R.L. | November 1986 | |
||
"Testing of a high performance, precision-bore raulgun" |
Peterson, D.R. | November 1986 | |
||
"Testing of a homopolar generator, energy storage inductor, opening-swtich railgun system" |
Zowarka, R.C. | November 1986 | |
||
"The high voltage homopolar generator" |
Price, J.H | Novmeber 1986 | |
||
"Testing of coaxial railguns in high vacuum" |
Upshaw, J.L. | November 1986 | |
||
"9 MJ laboratory gun and range at The University of Texas at Austin" |
Zowarka, R.C. | January 1989 | |
||
"A composite solid armature consolidation by pulse power processing: a novel homopolar generator application in EML technology" |
Persad, C. | January 1989 | |
||
"Advanced compulsator design" |
Driga, M.D | January 1989 | |
||
"Advanced compulsators for railguns" |
Pratap. S.B. | January 1989 | |
||
"An investigation into the potential for multiple rail railguns" |
Beno, J.H. | January 1989 | |
||
"Balcones homopolar generator power supply" |
Gully, J.H. | January 1989 | |
||
"Cooling for the armature windings in a repetitively fired air-core compulsator" |
Liu, H-P. | January 1989 | |
||
"Compulsator research at The University of Texas at Austin - an overview" |
Spann, M.L. | January 1989 | |
||
"Design and development of extremely high velocity electromagnetic launch accelerators - GEDI program" |
Upshaw, J.L. | January 1989 | |
||
"Pulse discharge control and machine protection for a multi-discharge compulsator" |
Thelen, R.F. | January 1989 | |
||
"Plasma armature railgun launcher simulations at The University of Texas at Austin" |
Weeks, D.A. | January 1989 | |
||
"Design and testing of large-bore, ultra-stiff railguns" |
Price, J.H. | January 1989 | |
||
"Design and testing of solid armatures for large-bore railguns" |
Walls, W.A. | January 1989 | |
||
"High power switches at the Center for Electromechanics at The University of Texas at Austin" |
Sledge, R.L. | January 1989 | |
||
"Testing of a rapid fire compensated pulsed alternator system" |
West, M.D. | January 1989 | |
||
"Design considertations in a 60 caliber electromagnetic railgun system" |
Fulcher, C.W. | January 1989 | |
||
"Design and operation of a high-energy railgun faculty" |
Peterson, D.R. | January 1989 | |
||
"Producing and gauging precision railgun bore" |
Peterson, D.R. | January 1989 | |
||
"Formulation and implementation of the current filament method for the analysis of current diffusion and heating in conductors in railguns and homopolar generators" |
Wu, A.Y. | January 1989 | |
||
"Induction launcher design considertations" |
Driga, M.D. | January 1989 | |
||
"Electrothermal accelerators: the power conditioning point of view" |
Driga, M.D. | January 1989 | |
||
"Electromagnetic launchers for space applications" |
Schroeder, J.M. | January 1989 | |
||
"Limits to the velocity of solid armatures in railguns" |
Pappas, J.A. | January 1989 | |
||
"Structural design of cylindrical raliguns" |
Fahrenthold, E.P. | January 1989 | |
||
"Wear of conductors in railguns: metallurgical aspects" |
Persad, C. | January 1989 | |
||
"Railgun current guard plates: active current management and augmentation" |
Beno, J.H. | June 1989 | |
||
"Comparison of the nature of torque production in reluctance and induction motors" |
Hsu, J.S. | March 1990 | |
||
"The CEM-UT rapid-fire compulsator railgun system-recent performance and development milestones" |
Perkins, D.E. | January 1991 | |
||
"Three-dimensional rail-current distribution near the armature of simple, square-bore, two-rail railguns" |
Beno, J.H. | January 1991 | |
||
"Rotating machines - power supplies for the next generation of EM accelerators" |
Spann, M.L. | January 1991 | |
||
"Heavy-duty explosively operated pulsed opening and closing switches: reducing cost and turnaround time" |
Peterson, D.R. | January 1991 | |
||
"Micrometeroid impact simulations using a railgun electromagnetic accelerator" |
Upshaw, J.L. | January 1991 | |
||
"An actively switched pulsed induction accelerator" |
Ingram, M.W. | January 1991 | |
||
"A new approach to a high efficiency inductive store" |
Zowarka, R.C. | January 1991 | |
||
"Large and small caliber railgun solid armatures: experimental results" |
Price, J.H. | January 1991 | |
||
"Final commissioning of the Balcones 60 MJ pulsed power supply" |
Bray, R.W. | January 1991 | |
||
"Armature design for coaxial induction launchers" |
Bresie, D.A. | January 1991 | |
||
"Parametric approach to linear induction accelerator design" |
Walls, A.W. | January 1991 | |
||
"Hypervelocity macroparticle accelerator experiments at CEM-UT" |
Liu, H-P | January 1991 | |
||
"Three-dimensional rail cooling analysis for a repetitively fired railgun" |
Ingram, S.K. | January 1991 | |
||
"A control algortihm for reluctance accelerators" |
Ingram, S.K. | January 1991 | |
||
"Design and testing of a .60 caliber, augmented railgun" |
Fuller, R.L. | January 1991 | |
||
"Limitations on the minimum charging time for the field coil of air core compensated pulsed alternators" |
Pratap, S.B. | January 1991 | |
||
"Design of a reluctance accelerator" |
Bresie, D.A. | January 1991 | |
||
"Power supply technology for electric guns" |
Gully, J.H. | January 1991 | |
||
"Final design of an air core compulsator driven 60 caliber railgun system" |
Kitzmiller, J.R. | January 1991 | |
||
"Experimental results from CEM-UT's single short 9 MJ railgun" |
Hayes, R.J. | January 1991 | |
||
"Parameter studies for traveling wave coaxial launchers" |
Wu, A.Y. | January 1991 | |
||
"Active current management for four-rail railguns" |
Beno, J.H. | January 1991 | |
||
"Stiff railguns" |
Weldon, W.F. | January 1991 | |
||
"Determination of iron-core losses under influence on third harmonic flux component" |
Rupanagunta, P. | March 1991 | |
||
"Comparison of the nature of torque production in reluctance and induction motors" |
Hsu, J.S. | June 1991 | |
||
"Transient eddy current distribution in the shield of the passively compensated, compensated pulsed alternator: Iron-core machines" |
Andrews, J.A. | July 1991 | |
||
"Steady state performance of reluctance motors under combined fundamental and third harmonic excitation, Part I: Theoretical analysis" |
Liou, S.S. | September 1991 | |
||
"Losses influenced by third-harmonic flux in induction motors" |
Hsu, J.S. | September 1991 | |
||
"Steady state performance of reluctance motors under combined fundamental and third harmonic excitation, Part I: Theoretical analysis" |
Liou, S.S. | March 1992 | |
||
"Possible errors in measurement of air-gap torque pulsations of induction motors" |
Hsu, J.S. | March 1992 | |
||
"Theoretical analysis of a collapsing field accelerator" |
Ingram, S.K. | January 1993 | |
||
"Operating experience with the 90-mm railgun at CEM-UT" |
Hahne, J.J. | January 1993 | |
||
"Design and fabrication of a tandem, 5 MA initiate switch for the batter upgraded supply" |
Aanstoos, T.A. | January 1993 | |
||
"Design, analysis, and fabrication of two lightweight, high L' railguns" |
Laughlin, R.L. | January 1993 | |
||
"Commissioning of a metal vapor laser for the illumination of high speed motion pictures" |
Wehrlen, D.J. |
January 1993 |
|
||
"BUS high current battery model" |
Kajs, J.P. |
January 1993 |
|
||
"Design of a dissipation circuit for a 560 MJ inductive storage supply" |
Upshaw, J.L. |
January 1993 |
|
||
"Coilgun technology at the Center for Electromechanics, The University of Texas at Austin" |
Bresie, D.A. |
January 1993 |
|
||
"Advanced compulsator technology" |
Pratap, S.B. |
January 1993 |
|
||
"Coilgun structures" |
Andrews, J.A. |
January 1993 |
|
||
"Fabrication of a rotor for a field based self-excited compulsator power supply for a 9 MJ railgun demonstrator" |
Manifold, S.M. |
January 1993 |
|
||
"Experimental reslts from solid armature tests at the Center for Electromechanics at the University of Texas at Austin" |
Hayes, R.J. |
January 1993 |
|
||
"Salvo fire experiments using a 0.60 caliber electromagnetic launcher" |
Fuller, R.L. |
January 1993 |
|
||
"Electromagnetic force, jerk, and electric gun projectile design" |
Zowarka, R.C. |
January 1993 |
|
||
"Manufacturing and testing of an air-core compulsator drive 0.60 caliber railgun system" |
Kitzmiller, J.R. |
January 1993 |
|
||
"9 MJ range gun compulsator sator design and fabrication" |
Herbst, J.D. |
January 1993 |
|
||
"Iron core compulsators for railgun power supplies" |
Weldon, W.F. |
January 1993 |
|
||
"Investigation of an alternator charged pulse forming network with flywheel energy storage" |
Gully, J.H. |
January 1993 |
|
||
"Multiphase railgun systems: a new concept" |
Murphy, S.K. |
January 1993 |
|
||
"Preliminary design of a 1 GJ homopoar generator" |
Headifen, G.R. |
January 1993 |
|
||
"A single element multiphase compulsator powered railgun system" |
Murthy, S.K. |
January 1994 |
|
||
"High magnetic field generation using single turn coils" |
Werst, M.D. |
July 1994 |
|
||
"Effects of eccentricities on shaft signals studied through windingless rotors" |
Hsu, J.S. |
September 1994 |
|
||
"Monitoring defects in induction motors thorugh air-gap torque observations" |
Hsu, J.S. |
September 1994 |
|
||
"Shaft signlas of salient-pole synchrnous machines for eccentricity and shorted field coil detections" |
Hsu, J.S. |
September 1994 |
|
||
"Design and testing of a rapid fire, lightweight, ultra stiff railgun for a cannon caliber electromagnetic launcher system" |
Werst, M.D. |
January 1995 |
|
||
"Power electronics and controls for air core compulsator" |
Wehrlen, D.J. |
January 1995 |
|
||
"Railgun instrumentation" |
Hotz, T.J. |
January 1995 |
|
||
"Status of the 9 MJ range gun system" |
Herbst, J.D. |
January 1995 |
|
||
"Fabrication and testing of a 30 mm and 90 mm laminated, high L' railgun designed and built at CEM-UT" |
Hahne, J.J. |
January 1995 |
|
||
"Electromagnetic and structural analysis of electric gun and integrated launch package systems" |
Yun, H.D. |
January 1995 |
|
||
"Design and testing of integrated metal armature sabots for launc of armor penetrating projectiles from electric guns" |
Price, J.H. |
January 1995 |
|
||
"Discarding armature and barrel optimization for a cannon caliber electromagnetic launcher system" |
Price, J.H. |
January 1995 |
|
||
"Testing of an air core compulsator driven 0.60 caliber railgun system" |
Fuller, R.L. |
January 1995 |
|
||
"SPEAR coilgun" |
Bresie, D.A. |
January 1995 |
|
||
"Optimization and critical design issues of the air core compulsator for the cannon caliber electromagnetic launcher system (CCEML)" |
Kitzmiller, J.R. |
January 1995 |
|
||
"Nonlinear control of a rigid rotor magnetic bearing system: modeling and simulation with full state feedback" |
Smith, R.D. |
March 1995 |
|
||
"Eddy currents in anisptropic composites applied to pulsed machinery" |
Pratap, S.D. |
March 1996 |
|
||
"Cannon-caliber electromagnetic launcher" |
Zielinski, A.E. |
January 1997 |
|
||
"Compulsator rotordynamics and suspension design" |
Murphy, B.T. |
January 1997 |
|
||
"Installation and commissioning of the 9 MJ range gun system 90 mm high L' laminated railgun" |
Herbst, J.D. |
January 1997 |
|
||
"A study of operaing modes for compulsator based EM launcher systems" |
Pratap, S.B. |
January 1997 |
|
||
"Railgun solid armature scale modeling" |
Zowarka, R.C. |
January 1997 |
|
||
"Pulsed rotating machine power supplies for electro-thermal-chemical guns" |
Walls, W.A. |
January 1997 |
|
||
"Testing of the cannon caliber rapid fire railgun" |
Werst, M.D. |
January 1997 |
|
||
"Laboratory testing of the pulse power system for the cannon caliber electromagnetic gun system (CCEMG) |
Kitzmiller, J.R. |
January 1997 |
|
||
"Design and testing of the power electronics for the cannon caliber electromagnetic gun system" |
Penney, C.E. |
January 1997 |
|
||
"Development and testing of experimental materials and designs for pulsed and continuous duty high current, high slip speed, generator contacts" |
Everett, J.E. |
March 1998 |
|
||
"Characterization of triggered vacuum switches for high current operation" |
Pappas, J.A. |
January 1999 |
|
||
"Continued testing of the cannon caliber electromagnetic gun system (CCEMG) " |
Werst, M.D. |
January 1999 |
|
||
"Single shot switch performance on the cannon caliber electromagnetic gun program" |
Hotz, T.J. |
January 1999 |
|
||
"Electromagnetic powder deposition experiments" |
Zowarka, R.C. |
January 1999 |
|
||
"High strain insulation systems for compulsator rotors" |
Hahne, J.J. |
January 1999 |
|
||
"Compensation in pulsed alternators" |
Driga, M.D. |
January 1999 |
|
||
"Subscale rotor spin testing for compulsator component development" |
Cook, K.G. |
January 1999 |
|
||
"Application of electromagnetic guns to future naval platforms" |
Walls, W.A. |
January 1999 |
|
||
"Electromagnetic and structural analyses of an integrated launch package" |
Liu, H-P. |
January 1999 |
|
||
"Modeling of multiple liner containment systems for high speed rotors" |
Dulaney, K.A. |
January 1999 |
|
||
"A field based, self-excited compulsator power supply for a 9 MJ railgun demonstrator" |
Weeks, D.A. |
January 1999 |
|
||
"Design and implementation of explosive opening switches in inductive circuits" |
Penney, C.E. |
April 2000 |
|
||
"A moving boundary fiffusion model for PIN diodes" |
H. Zhang |
January 2001 |
|
||
"Rotordynamics design and test results for a model scale compulsator rotor" |
Murphy, B.T. |
January 2001 |
|
||
"Brush/slip ring current collector performance and anomalies during compulsator commissioning" |
Hahne, J.J. |
January 2001 |
|
||
"Predicted versus actual performance of a model scale compulsator system" |
Kitzmiller, J.R. |
January 2001 |
|
||
"Single and multiphase compulsator system architectures: a practical comparison" |
Kitzmiller, J.R. |
January 2001 |
|
||
"The self-excitation process in electrical rotating machines operating in pulsed power regime" |
Driga, M.D. |
January 2001 |
|
||
"Power converters for railguns" |
Pappas, J.A. |
January 2001 |
|
||
"End-of-life design for composite rotors [flywheel systems]" |
Beno, J.H. |
January 2001 |
|
||
"Active magnetic bearings for energy storage systems for combat vehicles" |
Pichot, M.A. |
January 2001 |
|
||
"High voltage stator for a flywheel energy storage system" |
Aanstoos, T.A. |
January 2001 |
|
||
Inconsistences in electric motor certification requirements |
Gattozzi, A.L.. |
May 2002 |
|
||
"Comparison of a single pulsed alternator with two or more parallel for driving a railgun" |
Eccleshall, D. |
January 2001 |
|
||
"Circuits for protecting and triggering SCRs in high -power converters" |
Gattozzi, A.L. |
January 2003 |
|
||
"Effect of converter packaging techniques on device electrical conduction" |
Gatozzi, A.L. |
January 2003 |
|
||
"Sensor developmentts for compulsator-driven railgun systems" |
Penney, C.E. |
January 2003 |
|
||
"An application guide for compulsators" |
Kitzmiller, J.R. |
January 2003 |
|
||
"An optimized double ramp integrated launch package design for railguns" |
Kitzmiller, J.R. |
January 2003 |
|
||
"High-speed compulsator stator thermal management" |
Liu, H-P. |
January 2003 |
|
||
"Pulsed-duty characterization of turn-off for a population of SCRs and the practical effect of variations on equalization circuit design" |
Pappas, J.A. |
January 2003 |
|
||
"An assesment of losses in the field coil of the compulsator under dynamic conditions" |
Pratap, S.B. |
January 2003 |
|
||
"Design and testing of a high-speed spin test for evaluation pulse alternator windage loss effects" |
Werst, M.D. |
January 2003 |
|
||
"Light-weight containment for high energy, rotation machines" |
Strubhar, J.L. |
January 2003 |
|
||
"New electromagnetic lift control method for magnetic levitation systems and magnetic bearings" |
K.R. Davey |
May 2004 |
|
||
"Nine-phase armature windings design, test, and harmonic analysis" |
Jordan, H.E. |
January 2005 |
|
||
"Investigation of windage splits in an enclosed test fixture having a high speed composite rotor in low air pressure environments" |
Liu, H-P. |
January 2005 |
|
||
"Loss reduction strategies in design of magnetic bearing actuators for military vehicle applications" |
Pichot, M.A. |
January 2005 |
|
||
"Geometric modeling and electromagnetic analysis of electrical windings for pulsed alternators" |
Wedeking, G.A. |
January 2005 |
|
||
"Ultra-stiff, low mass EM gun design" |
Werst, M.D. |
January 2005 |
|
||
"Splits of windage losses in integrated transient rotor and stator thermal analysis of a high-speed alternator during multiple discharges" |
Liu, H-P. |
January 2005 |
|
||
"Design and analysis of passive homopolar null flux bearings" |
Davey, K.R. |
March 2005 |
|
||
"Designing transcranial magnetic stimulation systems" |
Davey, K.R. |
March 2005 |
|
||
"Numerical design of synchronous generators" |
Davey, K.R. |
August 2005 |
|
||
"Suppressing the surface field during transcranial magnetic stimulation" |
Davey, K.R. |
February 2006 |
|
||
"Transient performance and loss analysis in solid wound rotor pulsed power generators" |
Davey, K.R. |
February 2006 |
|
||
"The equivalent T circuit of the induction motor: its nonuniqueness and use to the magnetic field analyst" |
Davey, K.R.
|
April 2006 |
|
||
"A new strategy for management and reconfiguration of self-contained power systems" |
Davey, K.R. |
July 2006 |
|
||
"A new strategy for representation and control of self-contained power systems" |
Davey, K.R. |
July 2006 |
|
||
"Coordination of large pulsed loads on future electric ships" |
Domaschk, L.N. |
January 2007 |
|
||
"Induction motor performance testing with an inverter power supply, part 1" |
Jordan, H.E. |
January 2007 |
|
||
"Structural properties and testing of a composite banding used in high-speed rotors" |
Lelos, V. |
January 2007 |
|
||
"Field initiation design fundamentals for pulsed alternators" |
Kitzmiller, J.R. |
January 2007 |
|
||
"Thermoplastic application for pulsed power alternators" |
Hearn, C.S. |
January 2007 |
|
||
"Induction motor performance testing with an inverter power supply, Part 2" |
Zowarka, R.C. |
January 2007 |
|
||
"Initiation from a point anode in a dielectric liquid" |
Schmidt, W.E. |
June 2007 |
|
||
"Modeling the growth of streamers during liquid breakdown" |
Hebner, R.E. |
April 2008 |
|
||
"Development and analysis of YBCO trapped field magnets in electromechanical devices" |
Davey, K. |
June 2008 |
|
||
"Latin hypercube sampling and pattern search in magnetic field optimization problems" |
Davey, K. |
June 2008 |
|
||
"Modeling the growth of streamers during liquid breakdown" |
Hebner, R.E. |
April 2008 |
|
||
"3-D Electromagnetic Analysis of Armatures and Rails for High Launch Energy Applications" |
Liu, H-P |
June 2008 |
|
||
"Calculation of Magnetic Remanence" |
Davey, K.R. |
July 2009 |
|
||
"The Energy Return on Investment for Algal Biocrude" |
Beal, C.M |
July 2011 |
|
||
"A Framework to Report the Production of Renewable Diesel from Algae" |
Beal, C.M |
July 2011 |
|
||
